Fluting
Application
Fluting paper is used as a raw material in the manufacture of corrugated cardboard of various grades. Inner layers (corrugation) of corrugated cardboard are made from it.
The stable quality of packaging made of corrugated cardboard depends on the physics and mechanical characteristics of corrugated paper, as the corrugation takes the basic static and dynamic loads during transportation, storage, stacking of products packed inside the corrugated packaging.
Specifications
| Parameter name | Fluting grade | ||||||
| Б1-112 | Б1-125 | Б1-140 | |||||
| 1m2 paperweight, g | 112±6 | 125±6 | 140±7 | ||||
| Edgewise compression strength of a corrugated sample (SSTo), kN / m, not less | 1,1 | 1,2 | 1,4 | ||||
| Surface water absorption with one-sided wetting (Cobb30), g/m2 | 30-70 | 30-70 | 30-70 | ||||
| Compressive strength at a short distance in the transverse direction (SCTcd), kN/m, not less | 1,9 | 2,1 | 2,3 | ||||
| Flat crush resistance of a Fluting sample (SMT) over 15 mm wide strip, N, not less | 190 | 210 | 245 | ||||
| Tensile strength under tension, kN/m, not less | 6,5 | 7,0 | 7,3 | ||||
| Absolute bursting strength (BST), kPa, not less | 265 | 310 | 335 | ||||
| Humidity, % | 6-9 | 6-9 | 6-9 | ||||
Our company pays particular attention to the quality of the products.
Our own testing laboratories continuously monitor and improve the quality of the products at all stages of the production. All this ensures high consumer properties and manufacturability of cardboard and paper recycling of JSC “Yaroslavskaya Bumaga”.
